Pump stations & Accessories
Heat transfer fluid
Tyfocor® L
Tyfocor® L is a long-time, anti-freeze and corrosion-protection concentrate for cooling and heating systems as well as for solar and heating pump systems. When the circuit system is being filled, 25 up to 75 volume percent of neutral water should be added to the Tyfocor® L. The concentration of corrosion-inhibitors in Tyfocor® L provides long-term protection against corrosion, premature failure and scaling of components and materials. Tyfocor® L keeps the heat transfer area clean and thus assures a constantly high efficiency of the system. Tyfocor® L is suitable for continuous temperatures of up to 170 °C.
Example mixing ratio Tyfocor® L:
1 tank Tyfocor® L + 15,6 l water = 26 l readymix with 40 Vol % (-23,7 °C)
Tyfocor® LS
Tyfocor® LS is a ready for use, vaporisation-safe special heat transfer fluid on the basis of propylene-glycol. It is especially developed for use as a heat transfer fluid in solar heating systems which are capable of a high thermal load. (e.g. in vacuum-tube-collector systems). In order to keep its special properties, Tyfocor® LS must not be mixed with other heat transfer fluids or be diluted with water! Any loss in liquid can only be compensated by Tyfocor® LS.
Tyfocor® G-LS
Tyfocor® G-LS is a ready for use, vaporisation-safe special heat transfer fluid on the basis of propylene-glycol and was especially developed for use as heat transfer fluid in solar systems with direct discharge-flow through flat plate glass collectors. The properties are similar to those of Tyfocor® LS.
®Antifrogen SOL
®Antifrogen SOL is a ready for use, vaporisation-safe heat transfer fluid on the basis of propylene-glycol and higher boiling glycol. It is physiologically harmless and contains corrosion-inhibitors that will thoroughly protect all materials usually used in heating and solar thermal systems against corrosion, premature aging and incrustation. ®Antifrogen SOL HT will not segregate, withstand high operating temperatures and is suitable for both flat plate and vacuum tube collectors.
®Antifrogen SOL HT
®Antifrogen SOL HT has the same properties as ®Antifrogen SOL, but is predominantly based on higher boiling glycol, which makes it withstand operating temperatures of up to 200 °C and even extremely high standstill temperatures of up to 270 °C without decomposition. Hence it is particularly suitable for solar systems with a very high thermal load. ®Antifrogen SOL HT also offers a full frost protection up to -23 °C which will not diminish even after long-standing usage.
Heat transfer fluid
Canister of 11 kg concentrate
Article-no: 290 000 10 | Price bracket B
Heat transfer fluid
Tyfocor® LS Canister of 10 l readymix
Article-no: 290 000 20 | Price bracket B
Heat transfer fluid
Tyfocor® G-LS Canister of 10 l readymix
Article-no: 290 005 50 | Price bracket B
Heat transfer fluid
®Antifrogen SOL Canister of 10 l readymix
Article-no: 290 016 90 | Price bracket B
Heat transfer fluid
®Antifrogen SOL HT Canister of 10 l readymix
Article-no: 290 017 00 | Price bracket B
RSS-Feed